Ratings |
|
| HP 60Hz | 1.1 hp |
| Frequency | 60 Hz |
| Phase | Single-Phase |
| Volts | 208 VAC / 240 VAC |
| Cord Length | 6 ft / 1.83 m |
| Motor Type | Encapsulated |
| Continuous Duty | Yes |
| Input Phase | Single-Phase |
| Input Voltage | 208-240 VAC |
| Motor Insulation Classification | B |
| Amps at 230 Volts | 7 A |
Operation |
|
| Maximum Flow Rate - 60Hz | 25 gpm / 1500 gph / 36000 gpd / 5678 Lph / 94.64 Lpm / 5.68 m³/h |
| Minimum Flow Rate - 60Hz | 0 gpm / 0 gph / 0 gpd / 0 Lph / 0 Lpm / 0 m³/h |
| Rated Flow Rate - 60Hz | 25 gpm / 1500 gph / 36000 gpd / 5678 Lph / 94.64 Lpm / 5.68 m³/h |
| Shut-Off | 185 ft / 56.39 m |
| Minimum Head - 60Hz | 32 ft / 9.75 m |
| Maximum Suction Lift | 7 Meters |
| Stages | 3 |
| Pressure Transducer Included | YES |
| Motor Cooling | Water |
| Enclosure Rating | Type 3R |
| Max Operating Temperature | 122 °F / 50 °C |
| Pressure Transducer Included | YES |
| Submersible Use | No |
Liquid |
|
| Min Fluid Temperature | 33 °F / 0.56 °C |
| Max Fluid Temperature | 104 °F / 40 °C |
Materials of Construction |
|
| Pump Base Material | Plastic |
| Pump Body Material | Stainless Steel |
| Impeller Type | Closed |
| Impeller Material | Plastic |
| Check Valve | Yes |
| Check Valve Material | Plastic |
| Discharge Material | Stainless Steel |
| Fasteners Material | Stainless Steel |
| Seal Type | Lip Seal Ring |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Motor Fill Solution Type | Water + Propylene Glycol |
| Pump Shaft Material | Stainless Steel |
| Suction Material | Stainless Steel |
Installation |
|
| Discharge Thread | FNPT |
| Discharge Type | Threaded - FNPT |
| Discharge | 1 " |
| Impeller Diameter | 4 " / 102 mm |
| Suction | 1 " |
| Suction Type | Threaded - FNPT |
| Product Length | 10.84 " / 27.53 cm |
| Product Width | 13.3 " / 33.78 cm |
| Product Height | 18 " / 45.72 cm |
| Product Weight | 41.2 lb / 18.69 kg |
| Product Weight w/ Pack | 46 lb / 20.87 kg |
| Carton Length | 14 " / 35.56 cm |
| Carton Width | 16 " / 40.64 cm |
| Carton Height | 20 " / 50.8 cm |
Other |
|
| Accessories Included | (2) 1" couplings, (2) short 1" pipe nipples, allen wrench, and a small amount of sealing tape |
| Minimum Order Quantity | 1 |
| Accessories / Repair Kits |
|
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Electrical Agency Approvals | CSA / UL |
| Standard Warranty | 36 Months |
| Applications | Residential water-boosting applications |
| Repair Kit Available | Yes |
