566612 – PE-2.5F-PW

Direct drive pond pump for use in filtration, waterfalls, and streams Epoxy-filled pump is compact in design, produces superior water flow, and has corrosion-resistant plastic housing For use with fountain nozzles, biological filters, and circulating ponds up to 800 gallons Ideal for the water gardening environment For submersible use only 475 GPH capacity 13 feet maximum pumping height 0.50-inch male pipe thread discharge Energy-efficient Wattage: 80 watts Cord length: 15 feet 

Item: 566612
Model: PE-2.5F-PW

Ratings

HP 60Hz 1/28 hp
Frequency 60 Hz
Amps - Full Load 1.4 A
Full Load Watts 80 W
Volts 115 VAC
Cord Length 15 ft
Continuous Duty Yes
Input Phase Single-Phase
Input Voltage 115 VAC

Operation

Maximum Flow Rate - 60Hz 7.92 gpm / 475 gph
Shut-Off 13.4 ft
Submersible Use Yes

Installation

Discharge 0.5 "
Suction Type Screened
Product Width 10 "
Product Height 4.02 "
Pump Length 5.63 "
Product Weight w/ Pack 5 lb
Carton Length 7 "
Carton Width 5.25 "
Carton Height 4.63 "
Pump Height 4.02 "
Pump Width 4.02 "

Other

Electrical Agency Approvals CSA
Standard Warranty 36 Month Purchase / 36 Month Manufacturing
Applications Little GIANT PE Series Direct Drive Pumps are designed to operate continuously and product greater starting torque and more pressure than comparable mag-drive pumps. These pumps are ideal for use in filtration, waterfalls and streams. Pre-filter is included to protect the pump. Ideal for continuous circulation of ponds and fountains